this really helped me, thank you very much 🙌👌
You are a genius you just solve a major problem thank you very much Sir. continued success
Legend!!! Thanks so much – fixed!
My brand new Nordictrack has a lot of space between the belt and the deck. I tightened it but the belt still has a bounce to it. Do I need to keep tightening it? What else could be wrong. It was professionally installed and never used
My belt speeds up really fast and they slow downs?
This was a very helpful video. My tread belt is slipping, so now I know how to check & fix it
What’s under the belt? I have a shock absorption thing but the plastic is broken. Is that replaceable?
Bro thank you just fixed the wife’s treadmill!
Bullshit how could we it's not tight or loose,. We're not technicians,,,,, show us
Rav up your engine! He car guy.
Did he really say the most common reason the belt is loose is because of lubrication? Moron. Belts get loose…both drive and run belt. Your assessment is completely wrong. Run belts stretch over time. Drive belts do too. There are tests to do to figure out which one is the culprit. the stomp test is an easy way to figure that out. he doesn't mention that…eeesh
Thanks for the help
Thank you! I would've never found the tension spot!
This worked! Thanks so much! 2 thumbs up !
what to do if the treads are worn?
Thank you so much! Such a simple fix.
Very nice video! Thanks! I have the same treadmill, about 5 year old, and I feel there is a slight dip in the middle where foot lands while running. Assuming the deck is bad. Do you recommend to replace the deck? Not sure if this has a reversible deck but can I just it 180 degrees ?Normal usage is about twice a week for 5 miles each, is it normal for this deck to wear out?
If any one could help me on this….So basically my treadmill slips aswell but the Allen head bolts at the end that you tighten clockwise to tighten it won't budge. I used WD-50 thinking there was rust deposits there, but I tried to turn the Allen wrench again but it won't turn. So I guess I'm stuck with a slipping treadmill?
Relief! Thought I was going to have to spend unnecessary money for someone to come and fix my treadmill. Thanks !!
Thanks for the video, in my head I was thinking it had to be fully tripped down and thanks to you it took two minutes to fix. I wonder how many people have scrapped or given away treadmills because of a slipping belt. Thanks again.
Thanks alot mate this helped me heaps,I thought it was just a shit treadmill
Thx for your help.
I lubricated the belt and it becomes slippery lol idk whats wrong with my treadmill. Ive tried tightened the belt too.
I bought an oldie but goodie Vita master 6250 the calorie and mode monitor doesnt work is there a way to fix it?
Excellent video but I need to know how to remove the cover over the motor on a Nordic Track A2550? I cannot gt it off
My treadmill is different than yours. You tightened your belt using an Allen wrench. I tightened mine using a socket wrench. Heck, I didn't even know those spots existed on the treadmill. Thank you so much, RJ! I nearly worried myself to death for 3 hours wondering what I was gonna do. Thanks again and thanks to the founders of YouTube! With YouTube, I've repaired a washing machine, a lawn mower, a headlight/taillight in the car and now a treadmill. I feel unstoppable.
So my belt folded over and I’m hopeless. Any ideas?
I need help with mine 🙁
When its "slipping", does it sound like the motor is surging or going fast then slow?? Thats what mine sounds/ feels like! And mine is pre-lubed 🤔
Thank you for this video! 🙂
Thank you for this video. You might be interested in another source of belt slipping which I have just fixed. I found that both little bolts which connect the drive belt wheel casing to the running belt roller had both come out. Not sure why, constant pounding I guess. Anyway, thanks again. Videos like this restore faith in the usefulness of the internet.
Every single treadmill in my gym does this and it’s g-d annoying. You can’t even run when it’s like that.
I really appreciate you posting this video! I was about to give up on my treadmill and I love it. So thanks for sharing your wisdom!
My treadmill belt keeps pulling to one side and coming off center. Any idea what may be causing that? I think maybe needs to be tightened on one side? Idk. Just bought it used last week and it seems there's a lot of little things wrong with it
Thank you!!! Do you have a Pateron or something. I owe you at least something for this
I dont know whats wrong with mine it turns on but not moving 🤔
Thanx. Fixed it cause of u x
thank you for your helpful video. i own the f80 and it goes on, goes through all the adjusting screens and then when i press start it goes completely dead and wont even turn again till a while goes by. any advice?
Thanks! Fixed mine
Thanks for the video. Fixed my slipping issue – just had to tighten the belt.
Suddenly I cannot use the treadmill it start few second and stopped there is mentioned of system faulty
Thanks this was exactly what I had to do.
Oh! The lid to the belt just comes off like that.:)
Your email address will not be published.
Save my name, email, and website in this browser for the next time I comment.
The Ultimate Keto Diet Grocery List For Beginners
Beginner Yoga Workout | Easy Yoga For Weight Loss – Siberia
My family and my mate, bf also