I have a Nordic Track C970 Pro. Everything seemingly starts fine, but a little while into my run the screen resets and the track stops. Any ideas?
I have a weslo machine and some how the wire connector are broken how may i repair that.. 2:47 is where reminded me of that part.. please help!!
my nordictrack A.C.T. pro has a light out on the display screen, can this be fixed, does anyone know how to fix it or find place that will show me?
Would like to know what the part is that has the fan on top right next to the circuit board. The fan doesn't seem to work-
Need Help. I installed a new motor on my gold's gym 430i treadmill. The console works even the incline but the motor does not. I checked all the wire connections. Could it be a blown fuse or something? Please someone.
I got an e02 error on our konlega treadmill model k146B made by Xiamen K-power Sports Corp. Ltd. Need help pls.
Good treadmill>>>arah.in/hFHr initially it came with a busted part the amazon return policy came and picked itup. Weslo recently called me to let me know the warranty was expiring . I may reup on it.
I got a error code 5b on a gold gym 430i any idea what the code means?
Where can I get the wire harness if the one to my treadmill gets cut by chance?
I have the gold gym treadmill 410. The control panel does not turn on. I have a solid red light on the circuit board under the motor hood. So I know there is power. But the control panel will not turn on at all. Please help!
i have a treadmill but when i put it on, the board console ligth for a second, the fan start too and then go black again, what must be the problem?
thank you! I just bought my treadmill and it wouldn't turn on. followed all of your steps and I'm in business!
Hi I have a Proform 545s and it was working good, I did an incline and put the incline back down a little and walked almost a mile. When I started to get off, I pressed the stop button….nothing happened. I had to pull the magnet to get it to stop. None of the buttons work now but the incline button. Can you help me with this?
I have a AFG Pro 7.2 the data cable going to the console was severed. I replaced the cable and now the console has power and everything works on the console but the elevation motor and belt motor won't work. i have a solid red led and two solid green leds on the control board. Any ideas what the problem could be? Thanks!
I have a Nordictrack C2150 and have replaced the driver motor and the motor control board. The belt seems to surge a little bit and the motor controller board's red LED is blinking rapidly. Could it be surging due to lack of lubrication?
I have a NordicTrack X7I incline model #: NTL20909.3 – while using it the other day it went off an on several times while raising up and down then went off. Now when I turn it on the ifit screen will come on for a second then go back off and nothing else happens. It's like it went back off again… any suggestions?
Thank you so much! That was useful
the music should not be so loud it makes hearing the audio difficult… not getting activation on the control panel… did briefly, after checking, turned off to put back together, then… did not activate… so… now what? Proform 400e
Your email address will not be published.
Save my name, email, and website in this browser for the next time I comment.
The Ultimate Keto Diet Grocery List For Beginners
Beginner Yoga Workout | Easy Yoga For Weight Loss – Siberia
My family and my mate, bf also